Free ASE Practice Test (20 Questions, A1 to A9)
20 free questions mixed from across the ASE tests: engine, transmission, brakes, electrical, A/C, engine performance, diesel, and more.
20 free questions mixed from across the ASE tests: engine, transmission, brakes, electrical, A/C, engine performance, diesel, and more.
15 free G1 questions covering the maintenance and light repair work you see every day: brakes, electrical, engine, HVAC, suspension, and more.
15 free A1 questions on engine diagnosis, cylinder heads and valve train, the block, lubrication, and cooling.
15 free A2 questions on automatic transmission diagnosis, hydraulic tests, power flow, electronic controls, and in-vehicle service.
15 free A4 questions on steering systems, front and rear suspension, wheel alignment, wheels, tires, and TPMS.
15 free A5 questions on brake hydraulics, disc and drum brakes, power assist, parking brakes, and ABS and stability control.
15 free A6 questions on circuit basics, electrical testing, batteries, starting and charging, lighting, and module networks.
15 free A7 questions on A/C performance diagnosis, refrigerant service and handling, components, heating, and climate controls.
15 free A8 questions on driveability diagnosis, OBD II and scan data, ignition, fuel and air induction, emissions, and sensors.
15 free Tech A / Tech B questions pulled from across the ASE tests, so you can practice the format that trips everybody up.
A simple way to handle Technician A / Technician B questions on the ASE tests, plus the traps that catch people.
What short and long term fuel trims mean, what positive and negative numbers tell you, and how to use them to find vacuum leaks, bad MAFs, and more.
What a compression test and a leak-down test each tell you, the wet test trick, and how to tell rings from valves from a head gasket.
How to do a voltage drop test, where the meter leads go, why the circuit has to be working, and what the readings mean.
How to find what's draining a battery overnight: setting up the meter, waiting for modules to sleep, and tracking down the circuit.
How to check state of charge, do a load test, use a conductance tester, and avoid the mistakes that give you a false result.
How to figure out a slow crank: battery, cables, starter, or the engine itself, using current draw and voltage drop.
What high and low side A/C pressures tell you, and the patterns that point to low charge, overcharge, restrictions, and a bad compressor.
Why a brake pedal feels spongy, the bleeding mistakes that keep it that way, and how it's different from a low or sinking pedal.
What camber, caster, and toe each do, which way the car pulls, what tire wear to expect, and how thrust angle fits in.
What the upstream and downstream O2 sensors each do, what a healthy converter looks like on scan data, and what can fake a bad cat.
How to find the misfiring cylinder, how a swap test works, and what to check when the misfire won't move.
How to narrow down a slipping automatic transmission with the apply chart, line pressure, and scan data, plus the electronic causes people miss.
The symptoms of a blown head gasket, the tests that confirm it, and what to know about MLS gaskets before the repair.
A quick rundown of G1 and A1 through A9, and a simple way to pick which ASE test to start with.
ASE Pro is an independent study tool and is not affiliated with, endorsed by, or sponsored by the National Institute for Automotive Service Excellence (ASE).